Monday, March 24, 2008
We have a winner!
I am the proud new part-owner of a 1998 Lund Pro V 1775 Tiller! Both Cliff and I are very excited and can't wait to start putting things in their places. Considering all that it came with, it was a very good deal. I already have the map chip for the GPS, though a color one would be nice. I still have a color handheld I can put near the front if I like. I probably would have preferred a Crestliner Fish Hawk 1750, but I don't think I was going to find one in the price range. If we ever decide we want bigger rod storage and a rear casting deck (the only two weaknesses this boat really has) it will be easy to sell. Lund boats seem to be a religious expression in Minnesota.
Here is the text from the original ad:
-new 24V bow mount electric motor w/ universal sonar (Minnkota Maxxum)
-new 24V stern mount electric trolling motors (Minnkota Maxxum)
-new Lowrance GPS/Graph LMS-480 (takes mapping chips)
-2 bank battery charger
-3 batteries (1 engine & 2 trolling) all three only 2 seasons old
-electronics locker
-7 ft. Rod locker (lockable)
-bow and aft livewell/baitwells w/ "Pro-long" system
-Captains chair w/ arm rests
-3 Air-ride pedestal seats
-travel cover
-bow battery gauge
-bow trim switch
-console foot trim
-Wave Wackers
-Spare Tire
-AM/FM Cassette Stereo
-VHF Marine Radio Antenna
-4 Flush Mount Quick Release Rod Holders
-Lifetime trailer registration
-Boat registered through 09'
A picture of the back:
Friday, March 14, 2008
Dreaming of Pike on the Fly
Taking off on a furious internet searching tangent inspired by a post on the fishingminnesota.com forum, I discovered an Alaska fishing "lodge" near the little Eskimo village of Aniak, Alaska. Midnight Sun Trophy Pike Adventures has a houseboat on the Innoko River, which has 50-inch-plus Pike all over the place. It appears it would be like my Pike fishing trip outside of Calgary with Josh Nugent, except I would have to add an average of 15 inches or so.
That trip was about as much fun as I've ever had fishing. It was on a 1.5 mile backeddy that drains into the Bow river. Now, the Bow river is considered one of the top five trout rivers in the world and I had never been to Calgary. Even though I grew up fishing for trout, the thought of catching 25" rainbow all day still didn't excite me. Luckily, the main river was blown out with silt, so I didn't have to feel guilty blowing the Bow off and upsetting all the trout people I talk to in Oregon. It was in early May and the Pike season didn't open for another week in Alberta, so the guide had to get creative. It turns out he is one of only a few non-First Nations folks able to fish this section of the Bow on the Siksika Nation.
Josh drove me over an hour east from Calgary, starting at 9:00 AM. He backed his Clackacraft driftboat directly down the bank into what looked like a small lake. We got in and he rowed my ass around while I casted. I saw nothing for the first 90 minutes or so. He was getting nervous that I didn't believe there were any fish in there and he hadn't been there since the previous year to keep tabs on the action. Then they started hitting. And hitting. I caught about 40 fish over the course of the day and missed at least twice that many. After a while, I was trying *not* to catch fish that were too small. The water was clear enough that I could sight cast some of the time, and watch them follow the fly. I had one fish follow for at least two minutes beside the boat before I got it to bite. I probably should have taken that one out of the gene pool. The next day, we sized up and I landed about half as many, but they were at least twice as heavy, on average. I think a couple were pretty close to 40". I even tried conventional gear for a little while, but flies were far more effective.
Unfortunately, this trip made me overconfident about catching Muskies and Pike on flies for my next trip to Minnesota. A Muskie actually hit my popper on Lake Rebecca, but that's the only action I got. I almost enticed one to hit in the shallows on Mantrap, but I probably woulda gotten it to bite if I had used a twitch like a Kill'r Eel instead. I didn't even bring my fly rod for the next trip to MN. Too frustrating to cast out of a small boat, anyway.
So now Calgary seems like a poor substitute for the Innoko. I need some rich family members to appear and start feeling really generous. Failing that, I'll just have to save my pennies.
Saturday, March 8, 2008
Boats, redux
After spending some time talking to Chad Cain and others, I'm back looking at aluminum. Preferably, it will have front and rear casting decks of decent size, rod storage of (at least) 7'6", though 9' would be optimal. If I can find a used fiberglass with a deep V, I'll certainly be interested, I just don't hold out much hope I will find one at a price I want to spend.
I think 16 1/2' would be the smallest boat I'd be interested in, though 17 1/2-18' is perfect. I still haven't decided on single side-console or tiller yet. Either would work for the right price, I suppose.
So I made a list, to make it easier for myself to remember which ones would be good for Esox fishing and be able to go on big water. Many Lunds don't have a large casting deck in the front, and none at all in the back. So in many ways, I'd actually prefer an Alumacraft to a Lund. I think the Crestliner Fish Hawk 1750 SC is my current top Aluminum choice.
In any case, here is the list:
Crestliner
Tournament
Fish Hawk
Alumacraft
Dominator
Tournament Pro
Navigator
Magnum (older model)
(other models, such as Lunker and Classic, have sides that are too low)
Lund
Predator
Pro Guide
Explorer SS
Mr Pike
Tuffy
1760
MirroCraft
1875 Aggressor EXP
1751 Aggressor
Polarkraft
Kodiak
Smokercraft
ProMag
ProAngler
YarCraft
1785
I think 16 1/2' would be the smallest boat I'd be interested in, though 17 1/2-18' is perfect. I still haven't decided on single side-console or tiller yet. Either would work for the right price, I suppose.
So I made a list, to make it easier for myself to remember which ones would be good for Esox fishing and be able to go on big water. Many Lunds don't have a large casting deck in the front, and none at all in the back. So in many ways, I'd actually prefer an Alumacraft to a Lund. I think the Crestliner Fish Hawk 1750 SC is my current top Aluminum choice.
In any case, here is the list:
Crestliner
Tournament
Fish Hawk
Alumacraft
Dominator
Tournament Pro
Navigator
Magnum (older model)
(other models, such as Lunker and Classic, have sides that are too low)
Lund
Predator
Pro Guide
Explorer SS
Mr Pike
Tuffy
1760
MirroCraft
1875 Aggressor EXP
1751 Aggressor
Polarkraft
Kodiak
Smokercraft
ProMag
ProAngler
YarCraft
1785
Subscribe to:
Posts (Atom)